1.9 KiB

Raw Blame History

✅ Fixed: VueScan Can't Detect Brother Network Scanners on Linux Mint 22.1 — "ICMP admin prohibited filter" Solved

Body:

Solved: VueScan Cannot Detect Brother Network Scanners on Linux Mint 22.1 / Ubuntu 24.04

✅ TL;DR

If VueScan doesn’t detect your Brother network scanners unless your firewall is disabled, the issue is likely caused by firewalld zone policies silently rejecting traffic.

Fix: Move your network interface into the trusted zone.

🔧 Background

OS: Linux Mint 22.1 “Xia” (Ubuntu 24.04 base)
Scanner: Brother MFC and similar network models
Software: VueScan
Firewall: firewalld (nftables backend)

🐛 The Problem

Even with the correct ports open and Brother drivers installed, VueScan couldn’t see the scanner.

Running tcpdump showed:

ICMP host unreachable - admin prohibited filter

Despite:

Opening all documented Brother ports (UDP 54925, TCP 54926)
Adding direct rules, rich rules, and nftables manual rules

VueScan still couldn’t discover any scanners.

🧠 Root Cause

Firewalld’s zone chain system (e.g., filter_OUTPUT_POLICIES, filter_OUT_home) overrides direct rules unless placed in the exact right spot. Traffic was still being rejected in a deep subchain.

✅ The Fix

Move your interface to the trusted zone to allow discovery without disabling the firewall.

sudo firewall-cmd --zone=trusted --change-interface=eno1 --permanent
sudo firewall-cmd --reload

    Replace eno1 with your actual network interface (use ip a to check)

Then verify:

sudo firewall-cmd --get-active-zones

🎉 Result

VueScan now detects all Brother scanners on the network — no reboots required.
🔐 Security Note

This is safe if you're on a trusted home network behind a router. If you need more fine-grained access, you can create a custom firewalld zone to only allow specific IPs and ports.

1.9 KiB Raw Blame History Unescape Escape